The 1.7s will give you some more outta the cam--- that's a mild cam, the 1.7s will wake it up.
I run 1.7s on a cam built to nearly your specs (but based on the 1.7 ratio)... Puts down 300 rwhp on a 360. Use correct pushrod length, etc. and you should be fine.
I sell all the stuff for it...
Sam
www.socaldakota.com
619-274-1292
>
> From: "James Calder" <jCalder3@cfl.rr.com>
> Date: 2004/11/07 Sun PM 09:10:36 EST
> To: <dakota-truck@dakota-truck.net>
> Subject: DML: 1.6 vs. 1.7 rr's
>
>
> I'm going to be installing some roller rockers when I do my 408 build.
> Currently I have a 604 Competition Cams:lift .512 dur@.050 210, 220 / LSA
> 112. I know the 1.7's will fit in my MP valve covers but will they have any
> benefit due to the lift already built into the cam? If so, how (top end,
> bottom end, etc.)?
> Thanks for the help!
> James
>
>
>
This archive was generated by hypermail 2b29 : Sat Jan 01 2005 - 11:47:51 EST