> -----Original Message-----
> From: Gabriel A. Couriel
>
> that is correct... if the PCM is shifting the gears. however, on the
> 46RH,
> the H stands for Hydraulic. the transmission is hydraulically operated,
> so
> the PCM isn't needed to shift the gears.
>
> Gabriel A. Couriel
Uh, maybe you missed it....Miggity said the automatic PCM is needed for OD,
which it is, not for shifting other gears. Of course on the 46RH, you
could just use a toggle switch for the OD control but why bother when
automatic PCMs should be plentiful.....including the '93 360 MP PCM right
from Mopar.
Ray Block
1992 Dakota Sport, RC, 2WD, 5.2L
See Drag-Truk link for mods...
http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
This archive was generated by hypermail 2b29 : Wed Jun 01 2005 - 05:44:45 EDT