Re: No codes

From: Biff Byrum (bbyrum9@foothill.net)
Date: Sat May 21 2005 - 19:49:34 EDT


I talked to a local Dodge wrecker today and he said something sounds wrong.
Did you change out all the engine compartment wiring? Is it all connected
properly? The 60 pin into the brains is known to have some problems with one
or two pins sometimes.
A 12 code will go away after 50 key starts since power being disconnected to
the PCM. But the 55 code SHOULD be present every time.
Does your PCM number match exactly the combination of engine and trans you
are running now? Biff Byrum

----- Original Message -----
From: "Aaron Wyse" <awyse@sw.rr.com>
To: <dakota-truck@dakota-truck.net>
Sent: Saturday, May 21, 2005 9:33 AM
Subject: DML: No codes

>
> Just tried pulling codes on my truck to see why it's running SO rich.
> Nothing, not so much as power disconnected or end of test. Any ideas
where to start looking next?
> It's a '94.. was 2.5L. .but everything under the hood now is from a '93
V6.
> TIA
> Aaron Wyse
>



This archive was generated by hypermail 2b29 : Wed Jun 01 2005 - 05:44:45 EDT