Thanks for the info, Chris. I'll want to run the 12V on the 7pin to keep the
trailer battery topped off. I'll have a 12V fridge, and I've heard it will
discharge the trailer battery in 4 hours. This way the alternator can help
out.
Hey, my brake pedal switch has like 7 wires running to it. Do you know which
one I need to use?
Korey
In article <82CC5B790FEB854BBD58EEBA156E5C688310BE@srmoon.eng.emc.com>,
chrisn@emc.com ("nichols, christopher") writes:
> I just spliced the stoplight switch off the switch on the brake pedal for
> the signal wire for the brake controller. Make sure you toss a fuse between
> your +12v source for the brake controller, and the controller itself, too.
> Also put a fuse on the +12v going to the plug receptacle (if you run it)
> within an inch or so of the +12v source.
This archive was generated by hypermail 2b29 : Wed Jun 01 2005 - 05:44:45 EDT