Re: Rearview Mirror Adhesive

From: David Henry (DML@HenryWeb.net)
Date: Mon Jul 11 2005 - 22:04:26 EDT


Got the first few phases of the project done. Got the button glued on.
It's been drying for a few days now, so it should be good. Just need to get
around to mounting the mirror and see if it'll stay.

David 94 CC Sport 4x4, 318, 5spd, Lifted with 33" BFG MT's

> Terrible Tom <SilverEightynine@aol.com> wrote:
> : permatex rear view mirror adhesive kits. Two bucks at your local parts
> : store. Comes with the activator and the glue. Biggest thing to getting
> : them to work right is to have the mating surfaces perfectly clean. No
> : glue or oil residue on either the glass or the button. Mark the location
> : of the button on the OUTside of the windsheild... Use a product like
> : Goof Off or Goo Gone - to remove the old glue, then use glass cleaner to
> : remove the residue from that, and finally - isopropanol alcohol for a
> : totally clean surface. Apply activator to the glass - let it sit for 5
> : mins - apply 1 or 2 drops of glue to the button - hold button in place
> : for 2 mins or so - - wait about an hour for the glue to cure before
> : putting the mirror back on



This archive was generated by hypermail 2b29 : Mon Aug 01 2005 - 10:56:27 EDT