Re: RE: Is it safe to weld on truck?

From: jon@dakota-truck.net
Date: Sun Mar 04 2007 - 19:35:57 EST


"Bernd D. Ratsch" <bernd@dodgetrucks.org> wrote:

: Depending on what/where you're welding...disconnect the battery and/or
: disconnect the PCM. If you're just welding on the exhaust, disconnect the
: O2 sensor closest to the weld area. Most welding is safe though.

   Ditto that; also, put the clamp as close to the weld area
as possible to minimize the number of things that the current
has to flow through (and potentially damage).

-- 
                                          -Jon-

.- Jon Steiger -- jon@dakota-truck.net or jon@jonsteiger.com -. | '96 Kolb Firefly, '96 Suzuki Intruder, Miscellaneous Mopars | `-------------------------------- http://www.jonsteiger.com --'



This archive was generated by hypermail 2b29 : Sun Apr 01 2007 - 03:13:50 EDT