Check the ABS module connector for moisture, also...disconnect it and see if
the cluster stays on (no "No BUS" message). Other thing to check is the
CTM/BCM behind the left kickpanel - check the connectors for moisture.
A No BUS message means that the BUS communications has been interrupted
(somehow). Loose connection(s), moisture in the connection(s), bad cluster,
or any other module on the BUS that's intermittently shorting it out.
- Bernd
-----Original Message-----
From: DAKSY [mailto:rsmith13@nycap.rr.com]
Sent: Thursday, March 29, 2007 7:50 AM
To: dakota-truck@dakota-truck.net
Subject: DML: P 1687
Hey, DML..
With all the chatter about HID going on, seems everyone ignored my post...
The DAKSY has a rumbling/stumbling activity happening with an intermittent
MIL
Pulled a P 1687...= No MIC BUS message...
WTF is a Mechanical Instrument Cluster (MIC) module?
And what do I do about it?
TIA...
Bob (DAKSY) Smith
DAKSY2K on AIM
2K SY Dakota Sport +
V-6 4 x 4 5 speed
2K05 HD 883C YP
http://home.nycap.rr.com/daksy/
Averill Park, NY
This archive was generated by hypermail 2b29 : Sun Apr 01 2007 - 03:13:51 EDT