All cylinders are "0" compression.
I used the Cloyes C3072 Timing chain set with sprockets, not the Mopar ones, because of the availability in germany.
Stebel
> -----Ursprüngliche Nachricht-----
> Von: dakota-truck@dakota-truck.net
> Gesendet: 19.07.07 13:18:53
> An: dakota-truck@dakota-truck.net
> Betreff: Re: DML: Timing chain is brocken / Rockauto discount number needed
>
> Before removing the heads, are you sure the timing chain is installed
> correctly?
> Not questioning you and your ability...but (as an example), the Mopar chains
> have several marks on them that can be deceiving and cause the timing
> to be off
> (even though the marks are lined up) and can also cause the compression to be
> either low or at "0" due to timing issues.
>
> Are all cylinders at "0"??
>
> - Bernd
>
> Quoting stebel@web.de:
>
> >
> > Hi guys,
> >
> > after my timing chain has broken, I ordered a new one at rockauto.com.
> > I installed it and had no compression at all. Now I am removing the
> > heads to check what the problem is. Because I have to ordered more
> > parts at rockauto I would like to ask you guys if anybody of you have
> > a discount coupon for that site to save some money.
> > Wasn´t it so that when you ordered at rockauto you get automaticly
> > an discount coupon? I haven´t get one so far.
> >
> > I will make some pictures after the heads ar deinstalled and post
> > them on the net.
> >
> > Have fun
> > Stebel
> >
> >
>
>
>
>
>
This archive was generated by hypermail 2b29 : Wed Aug 01 2007 - 00:15:21 EDT