On Jul 31, 2009, at 12:17 , jon@dakota-truck.net wrote:
> I suppose I could use
> a wire wheel mounted on an angle grinder/drill to clean off the diff
> itself, but I've never tried that because I didn't want to throw junk
> inside of the diff. (I suppose the diff could be stuffed with shop
> towels first but I've never bothered.)
I generally do this, before hosing out the diff with brake cleaner. I
spray it all down inside anyway, and itty bitty bits of gasket or RTV
certainly won't hurt 8620 gear steel....
Mike
This archive was generated by hypermail 2b29 : Sat Aug 01 2009 - 00:31:47 EDT