Oh, and when testing that line, no short to ground untill I plug it into the PCM, but not knowing how it's saposed to test that doesn't tell me anything other than the harness doesn't have a problem with THAT line anyway...
---- OriginalMessage ----
>From: "Barry Oliver" <barrysuperhawk@comcast.net>
>To: dakota-truck@dakota-truck.net
>Sent: Mon, Jun 13, 2011, 07:49 PM
>Subject: Re: DML: 2000 4.7 pcm issues
>
>
>On 6/13/2011 9:22 PM, Michael Maskalans wrote:
>>
>>
>> On Jun 13, 2011, at 9:14 PM, Tony wrote:
>>
>>> and PCM tests fine...
>>
>> What sort of testing?
>>
>> With no short to ground on that 5v system something sounds wrong there
>> - but 'no bus' would be something wrong with CAN not with the 5v
>> sensor supply reference. I'm not sure what order things go in
>> check-wise but I'd be surprised if a bus error prevents the 5v
>> reference from being output. Are there any other computers on that 5v
>> line that could be shorting, or just sensors? I don't have a 4.7
>> wiring diagram anywhere, my stuff is all just too old.
>>
>> Mike
>>
>>
>I have a 2000 FSM in electronic format...
>
>
This archive was generated by hypermail 2b29 : Sat Jul 02 2011 - 18:20:00 EDT