>BTW, it can be a little tough to get a spanking new xfer case into low
>range.
>To do it, shift to Neutral on the tranny and yank hard on the xfer shifter.
When shifting the transfer case into or out of low you should always
shift the transmission into neutral. The least amount of shift effort
occurs if you shift slightly rolling, about 3mph. The transmission still
needs to be placed into neutral before shiting the t-case. In the Ram
V-10 this is about the only way to shift out of low without using two
hands.
Brent Cring
'91 dakota v-8 4x4
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:24 EDT