Hey folks;
Open the driver's door and look at the rubber plug that is in the post just
above the door latch, should work for the fender holes also.
BTW, I did find some of those "STANDARD" plastic body plugs in my stash,
they are about the diameter for a 1/2" hole and a 3/4" diameter finish lip.
They fit in the slots well and look OK. Alias, I only had three.
L. John Morris<ljohn@alltel.net>
!!!!! ... your local *HEMI* owner ...!!!!!
'97 SLT+ CC 4x4
5.2L, 5spd, 3.92SG
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:37 EDT