At 10:21 PM 4/9/97 -0400, you wrote:
>Hey folks;
>
>Open the driver's door and look at the rubber plug that is in the post just
>above the door latch, should work for the fender holes also.
>
>BTW, I did find some of those "STANDARD" plastic body plugs in my stash,
>they are about the diameter for a 1/2" hole and a 3/4" diameter finish lip.
> They fit in the slots well and look OK. Alias, I only had three.
>
>L. John Morris<ljohn@alltel.net>
>!!!!! ... your local *HEMI* owner ...!!!!!
>'97 SLT+ CC 4x4
>5.2L, 5spd, 3.92SG
>
>
I took the plug from the post above the door latch out and tried in one of
the oval holes in the engine compartment. It fit fine. So, I took the plug
into the dealer today. We were able to determine the part number by
searching through some computer schematics. The part number is 1774076
(description: plug-wheel). The cost is 25 cents each.
==========================================
Andy Callahan
quasideedle@uky.campus.mci.net
'97, V8, CC, Sport, 3.55, 5-speed, 4x2
Tire & Handling Package
All the little goodies
==========================================
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:37 EDT