>
> Actually with the stock valve springs, anything above 5500 will probably
> blow your engine up (at least the valve-train--push rods, etc.)
>
> Secondly, anything above 4800 rpm is wasted breath with a stock, or
> semi modified Dakota... the HP/Torque fall off after that...Again, that's
> a stock
> or semi-modified (I.e. stock cam)
>
> ..Sam '95 SLT
>
> BTW:
>
> If I COULD run 6500 rpm in 5th gear, that would be about 183 mph... :P
>
>
So what mods would have to be made to allow you to do the higher RPM's,
and still let you keep the low-end torgue and hp, cause I would like to
find a happy compromise somewhere in the middle, I want to be able to pull
big trailers and go fast.
Bruce
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:43 EDT