It must be nice to live somewhere that the state government wont throw
you in jail for messing up their all important smog check program......
Where I live (CALIF) we would be "hanged" for doing something like that
then fined up the WAZOOOOOOO !!!!!!!
Martin Alvarez
martin.alvarez@bglobal.com
-----Original Message-----
From: Daniel Colucci [SMTP:djcolucci@worldnet.att.net]
Sent: Thursday, December 18, 1997 2:43 PM
To: Dakota mailing list
Subject: DML: 360 prices
Hey guys!
I have just got off the phone with Dave Hughes from Hughes
engines about
building me a 360 for my 94 Dakota. Here's what he had to say:
360 block
prepped with Ross blower pistons 9.25 to 9.5:1, (I am currently
running a
Vortech), race prepped rods, torque plate hone, align bore,
grind the
crank, ARP bolts throughout, custom ground blower cam with lift
of .524 and
lobe separation at 112 degrees, high volume oil pump and windage
try,
balanced and blueprinted, square deck the block, double roller
timing
chain, o-ring the block, copper head gaskets, with magnum heads
with 2.02
valves race prepped with a port and polish. All assembled
without intake
and throttle body, $3670.00 if I supply my heads.
Dave said that this combination with my Vortech added would be
good for at
least 550 hp.
Plus now I would need a four barrel manifold with the four
barrel throttle
body and a new set of inectors. Approximate cost $1500.00. Then
I would
need a computer to run it all. This would be the major problem.
I'll keep
everyone posted.
Dan
94 sport 5.2 with a lot of goodies
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:08:04 EDT