Re: Figure this one out!!

From: Bruce Bridges (bbridges@alarismed.com)
Date: Wed Aug 05 1998 - 19:45:27 EDT


Eric,
Pry underneath the head of the screw as you turn it. Gently pry... Then
smash it when it doesnt come out... cut the head off, use a torch, anything
to PUT THE CHIP IN...
BKB
At 07:04 PM 8/5/98 EDT, you wrote:
>raise. And the cool thing is I finaly got my 5.9 computer!! I get home and
>pull the cable off the battery, then start to unscrew the computer connector!!
>Its unscrewing and unscrewing and unscrewing and I notice Im not getting
>anywhere!! To make a long story short, I think the plastic Oring around the
>female end of the screw inside the computer is spinning with the screw and
>leaves me screwed!! Any ideas, suggestions, jokes!?!?
>Thanks guys!
>Eric
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:18 EDT