So if you go for the Power amp pulleys you then must order another belt.
Damn smart of them. Now I have to consider the additional cost of the belt.
Wonder if this money would be better spent on something else? Maybe a cam?
-----Original Message-----
From: STRICKLAND, Tate <tstricklan@shl.com>
To: 'dakota-truck@buffnet.net' <dakota-truck@buffnet.net>
Date: Thursday, August 06, 1998 11:31 AM
Subject: RE: DML: power pulleys
>My message referred to the Summit pulleys - manufactured by march.
> Power amp pulleys are 199 - don't worry about the charging system.
>
>Performance pulleys are 186.50 - worry about the charging - the
>alternator is heavily underdriven on this set.
>
>Performance uses the stock belt. Power amp uses a 6 rib belt because
>a 7 rib isn't made in the needed size.
>
>Tate
>
>-----Original Message-----
>From: Vanderburg [SMTP:vanderbu@silk.net]
>Sent: Thursday, August 06, 1998 10:39 AM
>To: dakota-truck@buffnet.net
>Subject: Re: DML: power pulleys
>
>Do you need to replace the belt at the same time?
>Are these the same 25% underdrive rate as the March's?
>Will they cause you untold grief in the winter when you have the need
>for
>lights, heat, and brakes on allot due to a slower turning alternator?
>
>-----Original Message-----
>From: brian duffey <brian.duffey@intelsat.int>
>To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>Date: Thursday, August 06, 1998 3:07 AM
>Subject: re: DML: power pulleys
>
>
>>Tate,
>>
>>See earlier post.
>>Hypertech is now getting into the Dodge aftermarket.
>>Power Pulleys & belt for the Dak (Part # 3082 and 1098) $146.90 and
>$56.00
>>respectively.
>>This info. was supplied to me based upon my '95 Dak (5.2L).
>>
>>E-mail: sales@hypertech-inc.com
>>For specific info. regrding yor vehicle.
>>
>>Duff
>>-------------
>>Original Text
>>From STRICKT@SMTPGATE (Tate Strickland) {strickt@airmail.net}, on
>6/8/98
>>04:44:
>>To: DAKOTA-T@SMTPGATE ("'dakota-truck@buffnet.net'")
>>{dakota-truck@buffnet.net}
>>
>>I'll call Summit to see if they are the performance or amp models -
>only
>>interested in the amp model - don't need charging problems. As for
>Hyper
>>tech, they only advertise for ford and gm and mazda. They make
>pulleys for
>>freakin mazdas but not for CC products?
>>
>>Tate
>>
>>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:18 EDT