John -
I went to that page , but the intake pics won't load for some reason .
Can ya e-mail em to me ?
At 04:23 PM 8/7/98 -0500, you wrote:
>find something else though that I have been running for about a month now. I
>went to Home Depot and started looking at various pieces of tubing and
>couplings with the original intent of picking up some PVC and an elbow or
>something to make the bend when I happened across a product called "Semi
>Flexible Aluminum Tubing". It would appear that this stuff is intended for
>clothes dryer exhaust outlets. Now this is not the same plastic stuff that
>cannot hold it's own wieght. This is thin wall aluminum that is made simular
>to a plasitc drinking straw. It is about 28" long, and is 3" ID. It cost
>$4.88 plus tax. I picked up a rubber coupler for the intake hat and just
>stuck the K&N on the other end. The only down side I can see with this is
>that the inside is not perfctly smooth and in fact has ery small ridges it
>whole length. But I don't really see this as being a problem as the tube is
>still much straighter than the factory acrobatics tube.
> If anyone would like to see how this all looks, I have finally posted
>the pictures on the web at
>http://lonestar.texas.net/~jndneff/dakota/dakota.html
>
>John
>98 Dak CC 4X4 Sport, 5.2L, Auto, 3.92LSD, T&H Package, Power Everything,
>Billet Grill, Nerf Bars, Rhino Liner, Snug Lid, homebrew FIPK 2, DDBC
>
>
W . Jack Hilton III
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:18 EDT