RE: Magnecor wire buy ..

From: Mok, Alan (SPB Brentwood) (AMok@spbank.com)
Date: Tue Aug 25 1998 - 10:28:44 EDT


If you have a set of factory wires in good condition then you won't gain
much (if anything) with these wires. Unless you've done some internal
mods or have boost or N20 in which case you'll need to upgrade the spark
energy (coil, CD ignition, etc.).

A distributor cap with clean brass terminals/rotor would increase the
efficiency of the ignition as well.

Alan

'98 Dakota R/T (Headers, FABM & waiting for Shift kit)
'89 Mustang GT (347, Griggs, S-trim...)
Ducati 916 (someday)

                -----Original Message-----
                From: mike kulczycki [mailto:dakota1994@hotmail.com]
                Sent: Monday, August 24, 1998 8:15 PM
                To: dakota-truck@buffnet.net
                Subject: Re: DML: Magnecor wire buy ..

                i'd like to get in on this, it's a great price, but i
want to know if
                this will help on a stock system or do i need a high po
ignition and
                coil and all that other crap.... i'm runnin ac delco
rapid fires right
                now and these things work great, but will new plug wires
give me more
                power or what?? i'd like to eventually put in a high po
coil and some
                other stuff.....
                any feedback is apprecated....
                mike k
                94, cc, v6, 2wd, slt.... stuff...

>If any of you remember me talking about doing a group
purchase on the
                Magnecor
>wires, I'm just about ready ..
>
>I'll have the cash to purchase enough sets to get a
pretty good price
                break on
>the KV 8.5mm cable. This is one step below the racing
10mm version, and
                it
>provides total EMI and RFI supression which is
essential on our
                computer
>controlled trucks. I was planning on offering them at
~$90 (give or
                take $5,
>this is a rough estimate..) at the most, and shipping
will be free on
                this
>introductory offer.
>
>Check out Magnecor's web site, they have a very
detailed site that
                debunks
>alot of myths associated with mass produced
"low-resistance" wires.
>
>If everything goes as planned, I should be able to send
out the order
                in 2
>weeks, plus up to another 2 weeks for an order that
large to be
                cut/shipped.
>This means I'll have them in stock in a month.
>
>I'm mostly going to order wires for the 92-96 V-8
trucks including a
                few V10
>and V6 sets, as these seem to be what most people are
inquiring for,
                but I can
>get wires for just about anything.
>
>more info @
http://members.aol.com/rdperform/special.html
>
>Before, I was going to see if I could recieve payment
while the wires
                were
>being made, but I won't need to do that now.. I'll
offer these prices
                to
>anyone out of the first shipment I get.
>
>If anyone's interested, like I said, it'll be about a
month. If you
                want in on
>the buy for another vehicle/older model, I can do that
too.. Just
                E-mail me at
>either address.
>
>ttyl
>Patrick
>

                ______________________________________________________
                Get Your Private, Free Email at http://www.hotmail.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:26 EDT