>From what i've heard its actually a gear that has to be changed somewhere in
the transmission...
Chris Lang
-----Original Message-----
From: Mike Crumley <mcrumley@airmail.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Monday, August 31, 1998 1:22 PM
Subject: Re: DML: Speedo recalibration
>At 12:54 AM 8/31/98 , you wrote:
>
>>I'm about to switch over to some different wheels and tires on my Dak
>>which will throw off the speedo (going from the "stock" tires which have
>>an outer diam of 31.5 to a new set which are going to be about 30). Any
>>suggestions on the best approach to get the speedo recalibrated to read
>>accurately after the change? From my rough calcs it will be reading
>>about 5-6mph fast after the changeover...
>
>Might wanna check the archives to be sure (this has been discussed before)
>but if I remember correctly, it's a computer reprogram that has to be done.
>BTW, might help to know what year Dak you have.
>
>
>--
>Mike Crumley mcrumley@airmail.net
>97 RC 3.9L V6 3.55 Auto Rhino Liner
>Bug Shield Mud Flaps DDBC
>
>Childrens Book Titles You'll Never See--
>"You're Different...And That's Bad"
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:09:28 EDT