At 07:36 PM 2/5/99 -0500, you wrote:
>In a message dated 2/5/99 1:42:32 AM Eastern Standard Time,
>stei0302@cs.fredonia.edu writes:
>
><< Could you use the MP computer if you used an MSD retard box? >>
>
>Certainly but then you need a 6A or better also. I think if you can use the
>stock computer without hitting the rev limiter then you'd be better off but
>the not as much poop off the juice ?????
>
Yep, I'd like to swap as few things as possible. Might get real
old real quick if I have to keep swappin' the stock computer in and
out every time I want to use the nitrous... My goal is to be able
to go from naturally aspirated to on the juice without leaving my
seat, just by flippin' a few switches. (I'd have to shut the engine off
to switch ignitions, but that's OK, I can do that from the driver's seat
too.) :-)
Would the MSD retard take out enough advance though? Do you use one
with your stock computer? If you've got to retard the stock computer,
maybe the MP computer would advance the timing and the MSD box would only
retard it back to the "stock" timing, when you really need to go a bit
further? Is the MSD retard adjustable?
-Jon-
.--- stei0302@cs.fredonia.edu ------------------------------------.
| Affiliations: DoD, EAA, MP Race Team, NMA, SPA, USUA. RP-SEL |
| '96 Dodge Dakota v8 SLT CC (14.58@93.55), '96 Kolb FireFly 447 |
`----------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:12:32 EDT