The Band specs require you to back off the band adj.screws so that the
bands do not drag etc
----------
> From: Brandon Beasley <brb@FASTLANE.NET>
> To: dakota-truck@buffnet.net
> Subject: DML: **HELP** Trans Go Install
> Date: Saturday, March 13, 1999 10:44 PM
>
> Hi all,
> Today i started to install my TransGo Shift kit. I got it all done
except
> that i could not get the gears to in gage correctly. I did as the video
> said for reinstallation of the valve body back into the trans. I put the
> parking rod in to the trans and felt it "stick" into place. The rooster
> comb in the valve body was turned all the way clock-wise. I then
> connected the rod to the valve body with the clip. When I went to push
up
> the valve body up in to its spot the rooster comb 'clicked' a few times
> moving counter-clock-wise. I put a few bolts in and did as the video
said.
> I then tried to move the gear leaver at the trans to see if the trans
would
> change gears.....It would not. I tried for about 4 hrs to get it to
work.
> I am giving up for today...too tired and pissed to do any more. Can
anyone
> help me?!?!?
> Also When I adjusted the bands I had to turn the wrench many times before
I
> got the 72 in-lb required for the adjustment. I ready did not have too
> many threads left after I was done. The bands were snug against the
trans
> then I was done...Does this sound right?
> Thanks for any help,
> Brandon
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:09 EDT