What does MSD say about using Split-Fires? I know that Jacobs recommends
against them when using their ignitions.
'92 Dak CC 2wd 318 3.55
'84 GoldWing Interstate
-----Original Message-----
From: Bernd D. Ratsch <bernd@texas.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Tuesday, March 16, 1999 7:27 AM
Subject: RE: DML: RE: MSD
>
>It did make a noticeable difference on not only my truck ('97 Dak V6) but
>also one of my co-workers as well ('98 Dak V8). I have tried several other
>types of spark plugs on the market and wasn't too impressed with the
mileage
>and performance of the Champions (#4071). You need to run the plugs at
>.050" to get the most out of the MSD box and I've found that the Champion's
>actually caused worse gas mileage than the Split Fires I run. (Some people
>think that Split Fires are just "Hype" plugs...I've had great success with
>them for more than 5 years in all the vehicles i've owned...and
>repaired/modified.)
>
>I also opted for the MSD Blaster-SS Coil instead of the Accell (or any
>other) to keep it a "matched set". It should, however, work for you
without
>any problems.
>
>Bernd D. Ratsch
>Pflugerville, TX
>bernd@texas.net
>http://lonestar.texas.net/~bernd/Dakota.htm
>1997 Dakota SLT-CC (3.9L)
>License Plate Frame: "Don't Follow Me...I'm Trolling for Toyota's"
>Song for the Day: "Gonna buy me a Dodge Truck and blow those Fords off the
>road....."
>
>
>
>
>> -----Original Message-----
>> From: owner-dakota-truck@buffnet4.buffnet.net
>> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of
>> GrnDak4x4@aol.com
>> Sent: Monday, March 15, 1999 10:38 PM
>> To: dakota-truck@buffnet.net
>> Subject: Re: DML: RE: MSD
>>
>>
>> In a message dated 3/15/99 6:19:27 PM Central Standard Time,
>> bernd@texas.net
>> writes:
>>
>> << I agree...Rev-Limiter: NOT REQUIRED. I've got the 6A (Offroad
Version)
>> only
>> because of the vibration mounts...and of course...the cool Black
>> and Silver
>> Box.
>>
>> No need for the 6AL
>> >>
>>
>> Do you think the 6A Off Road made a difference? Is it really worth $125?
I
>> really would like to get one, considering I have changed about every
other
>> ignition part. I am currently running Borg Warner Select brass
>> cap and rotor,
>> MSD 8.5MM Super Conductor wires, Champion Truck Plugs, and an Accel Super
>> Coil. I thought the box would top all the ignition mods off, just
>> want to make
>> sure it will be worth it.
>> Kyle
>> 93 Dakota 4x4 V6
>>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:12 EDT