RE: 4BBL Throttle Body

From: Holloway,Frank T (Frank.T.Holloway@KP.ORG)
Date: Wed Apr 07 1999 - 10:44:41 EDT


I have one of the 4 BBL TB's, and it is a beautiful piece. Haven't installed
it yet because of the manifold problem (either wait for the MPI manifold, or
use one of the M-1 manifolds), and lack of time. I hope to get to it
sometime in the next couple of months.......

        Frank

> -----Original Message-----
> From: TXSTIM@aol.com [SMTP:TXSTIM@aol.com]
> Sent: Tuesday, April 06, 1999 5:01 PM
> To: dakota-truck@buffnet.net
> Subject: DML: 4BBL Throttle Body
>
> Has anyone tried the Mopar Performance 4BBL TB? I spoke with their tech
> line
> today and they indicated that it was "race only", and they wouldn't
> recommend
> it with the MP computer. I've got a set of larger injectors and adj. fuel
>
> pressure, so I'm thinking that I can probably get enough adjustment to
> compensate for the increased flow. Looking to see if anyone has used this
>
> TB, and/or could offer any advice.
>
> PS-I'm going to go with the MP single plane intake designed for a 4BBL
> carb,
> and drill the bosses for injectors. The intake for MPI won't be available
>
> for some "indefinite" period.



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:39 EDT