Tim-
How'd you get the auto stick handle off?
Tim wrote:
> From:Tim>magnum318@bewellnet.com Sun 11th While in
> Pep-Boys(they've treated me real good in Colorado) I was just looking
> for a new grab handle for the automatic shift lever(finally got that
> SOB off), decided to go to the electric fan aisle and see what they
> had. I found a 16" unit that put out 1500 CFM's, I knew that wasn't
> enough for the mighty V-8, BUT I noticed on the shelf below this unit
> a "HIGH OUTPUT" unit that was the same 16" size and it put out 1900
> CFM's and they were made by HAYDEN-- which makes very good oil cooler
> radiators. They recommend that 2 (two) 14" units are needed for our
> V-8's, but if 1(one) 16" unit works better, why bother with the extra
> electrical load that would draw off our alternators --might want to
> check it out
-- 95 318 2WD Sport Davidson, NC ICQ= 19665525 IM= HOSS318 Best 1/4= 14.679(91.85) Page= http://www.davidson.edu/personal/rotrottmann/default.htm
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:42 EDT