Re: OFF and ON to get codes..? doesn't work?

From: W. Jack Hilton III (HEMI@charter.net)
Date: Wed May 26 1999 - 00:14:31 EDT


Must not work on a 98 then , cuz I have done this before on many Chry-Co
cars and I can't get my 98 R/T to give me anything .

At 11:15 PM 5/25/99 -0500, you wrote:
>Yes you can. I've already done it several times.
>
>It takes a bit to get the ON/OFF procedure right....but it DOES work.
>
>
>----- Original Message -----
>From: W. Jack Hilton III <HEMI@charter.net>
>To: <dakota-truck@buffnet.net>
>Sent: Tuesday, May 25, 1999 9:38 PM
>Subject: Re: DML: OFF and ON to get codes..? doesn't work?
>
>
>>
>> You can't pull the codes manually in a 97+ truck .
>>
>> Say thank you to OBD II .
>>
>> :)
>>
>>
>> At 10:46 PM 5/25/99 EDT, you wrote:
>> >In a message dated 5/25/99 7:56:33 AM Central Daylight Time,
>bernd@texas.net
>> >writes:
>> >Hey,
>> > I took ur advice and cycled thru many times and it didn't work. it
>> >just stayed at the regular mileage reading i have a 97 dakota v6. is
>there
>> >anything wrong?
>> >-Dester
>> >
>> ><< Cycle the ignition from OFF to START three times and keep it in the
>START
>> > position on the third time. You'll see the codes appear on your Digital
>> > Odometer. 12 is normal and then the rest...if there are any. The DML
>> > Homepage has a link to tech stuff that has this process documented.
>Hope it
>> > helps...worked for me on my '97.
>> > >>
>> >
>> >
>> @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
>>
>> W. Jack Hilton III
>>
>> HEMI@charter.net
>>
>> http://webpages.charter.net/hemi/jbd1.html
>>
>> ICQ#: 32611901
>>
>> AOL Instant Messenger: "DwnSth69"
>>
>> @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
>>
>>
>
>
>
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

W. Jack Hilton III

HEMI@charter.net

http://webpages.charter.net/hemi/jbd1.html

ICQ#: 32611901

AOL Instant Messenger: "DwnSth69"

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:14:09 EDT