I did the same thing for my dak, I've gone through 4 different prototypes
and still haven't gotten them "just right" yet.
Peter L Anthony
PCN Inc.
Network Engineer
----- Original Message -----
From: <kwjohn@mindspring.com>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, November 16, 1999 10:00 PM
Subject: Re: DML: Durango/Dakota Q-forms
> Dave,
>
> Having run down this particular path before, I'd suggest that you talk
> with your local (better) car-stereo shop before you buy these things.
> (a) the Durango kickpanels are definately different, (b) the Q-forms are
> OK if you put a smaller speaker into them but they are not very solidly
> built. They also are usually not large enough for a 6.5" woofer.
>
> The stereo shop can build a set of custom fiberglass kick-panel for not
> much more than the Q-Forms, and the quality can be -very- good and
> -very- solid.
>
> I finally gave up on Q-Forms for my wife's 4Runner, and made the
> fiberglass baffles myself, and am in the process of doing the same for
> my Dak now. (darn job keeps getting in the way of my fun, though.)
>
> Kurt
>
> Dave Scelfo wrote:
> >
> > In my never ending saga to get as much info as possible before
plunking
> > down some serious change for the new stereo, I stumbled upon a site that
> > sells Q-forms for the Durango kickpanels. How different are these from
the
> > dakota kick panels? I'd like to get these. Tell me what you guys
think.
> > Assuming I CAN get them, is the interior technically a "light grey"
or
> > a "dark grey"?
> >
> > --
> > Dave
> >
> > ______________________________________________________
> > Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:15 EDT