Hi all in DML land!
I know at least one of you has installed a Hughes Cam but I don't remember
which one and I would like to know how which one you went with and how the
install went.
I'm thinking of their HER0612AL Magnum Roller Cam for my '99 5.9L Durango.
Here are the cam specs:
Lift @1.6 ratio: in/ex .512"/.512"
Dur @ .2": in/ex = 126/131
Dur @ .05": in/ex = 208/214
Ad Dur @ .02": in/ex = 258/260
LSA: 112
Open @ .05" tappet lift: in/ex = 12 ATC/36 BBC
Close @ .05" tappet lift: in/ex = 40 ABC/2 BTC
They make hotter cams but if the magnum roller cam fits their other
descriptions this would most likely be my best choice, but if you picked a
different one I would like to what your reasons were (I could be wrong in my
thinking).
Hughes Engines web site is http://hughesengines.com.
Thanks,
John.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:29 EDT