Yea, using jB Weld to box the plenums (hell of a lot of JB weld)
I checked the 2 I was able to complete this morning, DAMN! Its smooth as
glass, hard as a brick, and aint goin no where...
(not a stock intake) we cut the runners, and the little divider 2" down with
a mill....
If I can get this stuff to work, i'll take some pics =-)
__________________________________________________________
Tim Berry -- Chesapeake, VA
`97 SLT 318 auto CC 2x4 LSD:
Dual's w/Flowmaster, Homemade K&N GEN II, 2 Electric Fans
180 T-stat, MSD 8.5 wires, Traction Bars, F&B Stage 1, Mod'd intake
ASP Pullies (Crank/Alt), Trans Go Shift Kit, BFG 275/60's, MP Puter
BEST 1/4 15.488 @ 86.23 MPH
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: <Dester223@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, April 08, 2000 12:56 Bright
Subject: Re: DML: intake work, paused =(
> Am I hearing correctly? You're JB Welding your TB to your intake? Or
what
> are you doing?
> -Dester
>
> << Well... I get home from my friends house about 8pm and start workin on
> taking my intake off due to impatientness last time i put it on... and
was
> gonna replace the bellypan gasket... i also had the runners cut last
time,
> but didnt box the plenums...
> 1.5 hrs and I had the intake off, and started scraping the RTV... i had
30
> oz of JB Weld to box them suckers up with... well... I have 2 of the 4
> done... I guess i'm gonna have to look for 30 more oz tomorrow....
> sheesh.... =)
> __________________ >>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:38 EDT