So what were the peak numbers???
Sam
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Terry Herrin
> Sent: Saturday, May 20, 2000 7:39 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Dyno Results
>
>
> I'll be putting my scans on the web site later, but a quick
> rundown goes like this:
>
> With the addition of the Mopar PCM, 1.7 roller rockers, and ASP crank
> pulley since my dyno run last year, I gained 10hp at the peak 4200rpm.
> I gained 18hp at 5000rpm. I definitely gained more on the top end. I
> also gained 25 ft-lbs at the torque peak of 3200rpm.
>
> Also of note, back to back dyno runs with and without the MSD 6A
> ignition and Blaster SS coil showed a gain of 3hp at the peak 4200rpm.
> There was a maximum gain of 10hp at 3200rpm. So despite what some
> say, I have proof that the MSD ignition does improve performance.
> Nothing dramatic, but it's not a complete waste of money and effort.
>
> Terry Herrin
> 99 FR CC R/T
> 14.769 @ 91.43
> Wilmington, NC
> http://users.isaac.net/therrin/dakota.html
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:21 EDT