i have run the MP puter and stock puter, neither have a problem with mine,
infact, they still lean out when I get near no vacume, but still trying to
find a way around that (Aint ya Bernd? :)
*-=-=-=-=-=-=-=-=-=-=-=-=-*
Tim Berry (97 Dakota Club Cab)
Chesapeake, VA
Best 1/4: 13.50@101.91
*-=-=-=-=-=-=-=-=-=-=-=-=-*
>
> Jon
>
> Trying to remember but I think that they're a light blue.
>
> It sounds like the 24# work with some/most but not all Daks. When I
tested
> them
> with both a custom programmed computer and a MP computer, I did not
trigger
> a code but it bogged badly whenever I floored the pedal from any rpm.
>
> It seems like one or more of the injector output drivers in your computer
> is not responding properly to the control signal and triggering the code
27
> which, in turn, is triggering the MIL.
>
> Bob. Burlington, Ont., Canada.
> '97 Dakota CC, 5.2L, 4x2, 3.92 SG, auto., 4265 lb.
> Dyno: 231.2 rwhp 340.0 lb-ft rw torque
> PB: 14.737 @ 91.75 9.364 @ 72.95
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:56 EDT