i believe the clip is called an e-clip or a c-clip, depending on who you
ask.
the tool just removes the clip.
On Sat, 30 Dec 2000, Cal Hyer wrote:
> Casey,
> Looked in my FSM for a '99. It takes a special tool.
> It shows a picture of the tool, but not exactly what it is "removing". I
> believe that there is a wire retaining clip on the back side of the crank.
> The tool is a flat fork like item that will slide behind the crank and push
> the clip off. I think the same tool will shove the clip back on in the
> installation process. I think the tool would be available at most auto
> parts stores, and shouldn't cost very much. The wire clip would most likely
> be avail. also.
> Cal Hyer
>
>
> ----- Original Message -----
> From: Casey Aldridge <caldridge@uswest.net>
> To: Dmlofftopic <dmlofftopic@egroups.com>; DML <dakota-truck@buffnet.net>
> Sent: Saturday, December 30, 2000 3:03 PM
> Subject: DML: Manual Window cranks..HELP..
>
>
> > Just wondering if any of you guys have ever taken the door panels off of
> > your dak....how in hell
> > do you get the manual window crank off so you can remove the panel...im
> > trying get a good look at the door speakers..
> > i need to know what size they are...so i you know that too..it would
> help...
> > Please respond to me off list at caldridge@qwest.net...thanks for the
> help.
> >
> >
> > ==============================================
> > Casey Aldridge
> > Tempe, AZ
> > '97 RC V6 Auto 3.55 One Side Fire
> > Autolite 3923's, 180* T-stat, Ported TB
> > Electric Fan (stock fan removed)
> > Powerdyne 6psi Supercharger
> > Dodge Tonneau Cover, Body Color Dash
> > R/T Rims riding on BFG g-force T/A
> > 255/50ZR17's, Kenwood Deck, Fosgate Amp
> > Fosgate 12" Punch XLC
> > Hotchkis 2/3 Drop
> > 16.311 @ 85 MPH, EST. 4100lbs w/driver
> > www.users.qwest.net/~caldridge
> > ============================================
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:10 EDT