Sean,
I used a small piece of flat bar about 1 inch wide to mount the filter
end to the fender well. There are a couple holes in the fenderwell that can
be tapped to 1/4-20 & there is a stud sticking up that can be used.
Bill
SEMIHEMI01@AOL.COM (Bill C.) 2001 QC, 4.7L, KENNE BELL SC'ed, 5spd.
3.55 LSD, Bored & polished TB, 10w-30 MOBIL 1, GIBSON 3" Single <A
HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:44 EDT