i have 235/75/15s on my 94 2wd dakota. and they rub some on full turn.
it's not bad, but i wouldn't go any wider than that on the stock rims at
least. i think the 255s would rub on the front with the stock rims. in the
back you will be fine. a friend of mine is running 255s on the back with
his stock rims. that's my opinion at least... good luck..
mike k
>From: "LaMont J. Gilles" <lgilles@nospam.satx.rr.com>
>Reply-To: dakota-truck@buffnet.net
>To: dakota-truck-moderator@bent.twistedbits.net
>Subject: Re: DML: Tire question
>Date: Sun, 10 Jun 2001 18:06:52 -0500
>
>I understand they are taller and therefore I would need the speedometer
>recalibrated.
>
>But my concern is they are wider and would they rub the inner fender when I
>turn?
>
>Thanks.
>
>
>
>--
>
>
>LaMont J. Gilles
>
>
>
><SEMIHEMI01@aol.com> wrote in message news:36.1712cf74.28552999@aol.com...
> > LaMont,
> > They are 1.57 inches taller. Go to this web site for Tire
>Calculator>>
><A
> > HREF="http://www.dakota-truck.net/TIRECALC/tirecalc.html">tire calc.</A>
> > Bill
> >
> > SEMIHEMI01@AOL.COM (Bill C.) 2001 QC, 4.7L, KENNE BELL SC'ed, 5spd.
> > 3.55 LSD, Bored & polished TB, 10w-30 MOBIL 1, GIBSON 3" Single <A
> > HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
> >
>
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:46 EDT