Suggestions?
Take pictures of Becca with her arm in the oil pan and her
br---....well, you the picture. ;)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Pukeloser@aol.com
Sent: Saturday, July 07, 2001 6:52 PM
To: dakota-truck@buffnet.net
Subject: DML: dropped a lifter into oil pan
Hey Everyone,
I'm doing this cam project and I dropped a lifter into the oil pan, it
was
the lifter on the drivers side closest to the firewall. It was sticking
and
wouldn't push up so I pushed it down and tried to catch it but it
slipped out
of my fingers (must have been covered in oil or something heh eh)
Anyway does anyone know if I can drop the oil pan far enough to reach
in
and get it or do I have to remove it? Because (according to the FSM) I
have
to unbolt the motor mounts and jack up the motor to remove the pan
completely
and I don't want to have to do that. My friend Becca is going to help me
on
monday and she has much narrower arms than I do (but much better breasts
and
butt, sorry if that offends anyone but it is a compliment after all).
John S
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:04 EDT