Thanx, John. I'll check that as well as for a loose ground.
David Day
davidday1@qwest.net
<Pukeloser@aol.com> wrote in message news:a2.167ccb2d.2879074e@aol.com...
> Hey David,
>
> I had the same problem with my 95 cc slt. It is due to an exposed wire
near
> the tranny (I believe it is a speed sensor wire) that had been damaged
due
> to exposure to the elements. I soldered the wire and wrapped it up good
and
> haven't had a problem since. The original problem only happened when I hit
> big puddles of water (it was worse in colder weather)
>
> John S
>
> 95 cc 318 auto, transgo shift kit, HE stage II TB and intake, HE 1418 cam,
> 1.6 Roller rockers, MSD digi6+, MSD HVC coil & 8.5 wires, Hp cap + rotor,
MP
> PCM, DT headers, Gibson exhaust (3" from headers back, no cat), 180 stat,
> autolite 3923's, progear DR timing chain, 24# FMS injectors, auburn LSD,
4.10
> gears, superior axles, K&N X-stream filter system, MP valve covers
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:04 EDT