OK Skippy, just remember I work on your truck just as much(if not more) as
you do on mine!!!!
Sam South
95 Dak, 5.2L,3.90 LSD,5-speed(Soon to be 360 powered)
14.10@98.05
http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
http://people.mw.mediaone.net/sawcut64/home.html
----- Original Message -----
From: "Mark Kuzia" <flyboy01@mediaone.net>
To: <dakota-truck@buffnet.net>
Sent: Saturday, July 14, 2001 10:43 PM
Subject: DML: Re: Attn: John S and Sam South, was:
cam/rockers/intake/tb/injectors are in
> > Anyhow I'd like to thank everyone ahead of time for all there input
(Jon,
> >Bernd, Mark, and many others). I am thanking you now because if I screwed
> up
> > somewhere and the engine doesn't run right I'll probably be cursing you
> all
> > for getting me back into the hot rodding scene.
> > So wish me luck, I'll let you know what happens on monday.
>
> Attn: John S and Sam South
>
> My standard disclaimer.........
>
> There are no guarantees or warranties neither expressed nor implied. Any
> information and help I have provided is to be taken at your own risk. As
an
> adult it is your responsibility to verify and research and all information
> shared and make sure all work performed is to your standards. It is also
> your responsibility entirely if you screw anything up that I may have
> recommended, provided incorrect information on, or that I have performed
> labor on in a faulty manner. All speed equipment MUST be installed and
> operated by qualified experts and technicians only. My liability is hereby
> limited by the terms and conditions set forth in this document. This
> disclaimer applies to all situations except the following:
>
> 1) Everything you have done by my advice turns out as expected, in that
> case, I accept all public praise and admiration everyday for at least a
> period of one week, and henceforth at least once a week for a period of 90
> days.
>
> 2) If in fact the performance meets/exceeds your expectations, you may
send
> monetary gifts directly to my home address in the form of cash, certified
> checks, and money orders. These gifts may also be disbursed in person, but
I
> do advise against it as I may grow tired of you quickly. Monetary gifts
must
> exceed $100, and must be disbursed on the same schedule as described in
the
> previous paragraph.
>
> Thank You,
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph
> ~360ci, 5-spd, 4.11 LS (8 3/4 [3.90 SG] coming soon)
> 1994 Dakota 15.36 @ 91.56 mph
> ~318ci, 5-spd, 3.90 LS (bone stock, no mods)
>
>
> ----- Original Message -----
> From: <Pukeloser@aol.com>
> To: <dakota-truck@buffnet.net>
> Sent: Saturday, July 14, 2001 1:58 AM
> Subject: DML: cam/rockers/intake/tb/injectors are in
>
>
> > Ok fellas,
> >
> > I have installed the cam (Hughes 1814), lifters, valve springs, 1.6
> roller
> > rockers, ported intake manifold, hughes stage 2 TB, FMS 24# injectors,
> > progear DR timing chain and K&N X-stream filter. I am not starting the
> engine
> > 'til monday so I can have someone else there to keep an eye on
everything
> > while I do the ole cam break-in thing.
> > I am sorta nervous and way excited to see if I didn't screw up.
> > Anyhow I'd like to thank everyone ahead of time for all there input
(Jon,
> > Bernd, Mark, and many others). I am thanking you now because if I
screwed
> up
> > somewhere and the engine doesn't run right I'll probably be cursing you
> all
> > for getting me back into the hot rodding scene.
> > So wish me luck, I'll let you know what happens on monday.
> >
> > PS There is a chance that I'l be able to do it today (sat) but I'm not
> sure
> > yet.
> >
> > Thanks
> >
> > John S
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:06 EDT