At 08:42 AM 11/23/01 -0500, you wrote:
>Hi all,
>
>I want to change the gearlube in both my transfer cases in my '98 DAK 4x4.
>I bought the right stuff (GL5 rated 80W90) and a hand powered pump to remove
>the old stuff (I don't wanna change the seals and take off the covers).
>
>My question is how do the plugs come out of the cases? After looking around
>under there, it seems like there is a rubber plug about 1/2 way up the cover
>of the differential case. Does that just pull out? I think I can get the
>pump's tube in that hole and pump out the existing fluid.
>
>Anyone done this and care to impart some advise? Thanks all!
They don't have seals(at least not on the '98). Always a good idea to take
the
cover off though to check things over.
John
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:33 EDT