Yep, I've had the tailshaft seal replaced as well. Mine was only weeping a
little.
Jon Smith wrote:
> where exactly is it leaking? I had a bad leak which turned out to be a
> tranny tailshaft seal.
>
> to seal the Tcase itself, you remove the case. Remove the front output
> shaft yoke, then open the case up. Personally I would dimple the sealing
> surfaces with a center punch, clean w/ brake cleaner and assemble using
> The Right Stuff by Permatex
>
>
> ----- Original Message -----
> From: "Suter, Rick" <RSuter@bizfon.com>
> To: <dakota-truck@BUFFNET.NET>
> Sent: Wednesday, January 02, 2002 8:55 AM
> Subject: DML: T-Case Leaking................................
>
>
>>
>> Any ideas on sealing up a leaking T-Case to Tranny connection on a '99
> 5.2l
>> auto? It seems the Dodge Boys didn't figure this one out in the 7 years
> they
>> had as I had to do the same fix on my '92 5.2l also.
>>
>> Last time, I just disconnected the driveshafts, unbolted the T-Case and
>> supported it, slide it back, cleaned it up then gooped with Permatex and
> put
>> the whole mess back together.
>>
>> thanks,
>>
>> Rick
>>
>>
-- -andy andylevy@yahoo.com Maintainer, DML FAQ - http://www.dakota-truck.net/faq/ http://home.twcny.rr.com/andylevy/dakota/ '99 CC 4x4 318 auto
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:47 EDT