20 degrees is quite a bit. You shouldn't need more than 8-10 degrees
max.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Yuri Osipov
Sent: Friday, January 04, 2002 11:17 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: BEST 180 thermostat ???? Robert Shaw? - Jet 180?
I have got an M1 2 barrel, taking out 20 degrees of timing, mopar
headers,
running 91 octane here in Cali that is the best we can do! and yes I
know
that this is part of the problem (pinging-wise) but my truck should not
overheat that much!
Yuri
>From: "Bernd D. Ratsch" <bernd@texas.net>
>Reply-To: dakota-truck@buffnet.net
>To: dakota-truck@buffnet.net
>Subject: DML: RE: BEST 180 thermostat ???? Robert Shaw? - Jet 180?
>Date: Fri, 04 Jan 2002 09:35:05 -0600
>
>Yuri,
>
>With the engine running that hot, and the other problems you've
>posted...this isn't just related to the t'stat. What type of fuel are
>you running, how much total timing are you taking out (too much can
>also over heat an engine), what type of manifold?
>
>- Bernd
>
>-----Original Message-----
>From: owner-dakota-truck@buffnet.net
>[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Yuri Osipov
>Sent: Friday, January 04, 2002 2:17 AM
>To: dakotart@egroups.com; dakotart408@yahoogroups.com;
>dakota-truck@buffnet.net
>Subject: DML: BEST 180 thermostat ???? Robert Shaw? - Jet 180?
>
>
>Since my engine is running SUPER HOT, tomorrow I will try to do the
>radiator flush, tune up, and a new thermostat.
>
>Now my question is, which 180 thermostat is best to use for a vorteched
>application? I hear Robert Shaw or Jet 180 are the best but I really
>need the most reliable, balaced, and cold!
>
>Thanks in advance
>
>_________________________________________________________________
>Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:47 EDT