The spring is double riveted onto the outside pad.
TonyC
-----Original Message-----
From: William H. Hiatt III <william@hiatt.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Friday, January 18, 2002 8:02 PM
Subject: DML: RE: 2K Brakes pads - PLEASE HELP
>Just reuse the spring. Also, raybestos number for this is 820 (I.E.
>Superstops would be SSD820)
>
>william
>
>-----Original Message-----
>From: owner-dakota-truck@BUFFNET.NET
>[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of TonyC
>Sent: Friday, January 18, 2002 2:42 PM
>To: Dakota-Truck@Buffnet.Net
>Subject: DML: 2K Brakes pads - PLEASE HELP
>
>
>I'm about due for a set of pads on the front of the 2K R/T. I've
>ordered up sets from Wagner (MX820) and Performance Friction (7464 or
>0746.20). Both have been wrong when compared to the factory installed
>pads. The inners on both sets were correct, but the outers were both
>wrong. The factory outer has a set of locating tits that locate it into
>the caliper, along with a 2 sided spring that locates it against the
>caliper mount. The Wagner has the tits, but no spring, and the Perf
>Friction doesn't have the tits, and the spring is only one sided.
>
>Has anyone run into this? Has anyone found the correct pad at somewhere
>other than the dealer?
>
>I did call the dealer, and they have two sets available to fit. One std
>issue $49, and the other a premium one for $129. The std issue, is a
>messy pad. And I feel I can get a premium pad on less than the $129.
>
>Thanks in advance.
>TonyC
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:49 EDT