If threading the steel bolts into aluminum, use anti-sieze on threads.and
torque to spec.
----- Original Message -----
From: jay & dana <jay&dana@telus.net>
To: DML <dakota-truck@buffnet.net>
Sent: Sunday, January 20, 2002 1:17 PM
Subject: DML: Tstat bolts
> When replacing these bolts after a new gasket should you use anti-seize or
a
> thread locker or are they fine just as is if torqued properly?
>
> TIA
> ~Jay
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:49 EDT