The washer has two sides: a small one and a large one.
The LARGE end faces the plug and the SMALL end faces the head.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Punch
Sent: Wednesday, January 30, 2002 5:40 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: Re: RE: 3923 gasket question
ask autolite the question!
----- Original Message -----
From: "jay & dana" <jay&dana@telus.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, January 30, 2002 5:52 PM
Subject: DML: Re: RE: 3923 gasket question
> See this is what I'm talking about, I'M SO CONFUSED :-) Kevin
> responded back saying the flat side goes against the plug, and Sean
> responds below with the flat side against the head. I just want to do
this
> right the first time. Anyone else???
>
> Thanks
> Jay
>
>
>
> >
> >The flat side goes against the cylinder head. The angled seat on the
> >plug will collapse the gasket when torqued.
> >
> >Sean
> >'92 RC Sport 3.9L 5spd - 255,000mi!
> >'01 CC SLT+ 4.7L 5spd 3.92 LSD Mobil-1!
> >http://www.twistedbits.net/WWWProfile/dakota/DnuuSncssJujU
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:54 EDT