On Aug 25, 2004, at 19:29, WiLieR[SS] wrote:
> Simply grind the head off the rivets and then use something like an
> air hammer, or a regular hammer and a good punch, to drive the rivet
> back through the frame.
Good luck beating them out. I've had no luck whatsoever, and will
probably resort to drilling them out.
-- Mike Maskalans <http://mike.tepidcola.com/dodge/> '84 RamCharger Daily Driver '98 Dakota under the knife mobile.612.618.4652 home.585.935.7129
This archive was generated by hypermail 2b29 : Wed Sep 01 2004 - 00:53:42 EDT