Re: Vibration at high speeds

From: Chris Tesinsky (yellowrt@hotmail.com)
Date: Mon Mar 08 1999 - 06:35:29 EST


It seems to be only on the Club Cabs, that had the one piece aluminum
driveshaft replace the original two piece. I haven't heard of any
problems on the regular cabs.

'99 Solar Yellow R/T CC

----Original Message Follows----
From: Dak99RT@aol.com
Date: Sun, 7 Mar 1999 18:47:57 EST
To: dakota-truck@buffnet.net
Subject: Re: DML: Vibration at high speeds
Reply-To: dakota-truck@buffnet.net

In a message dated 3/7/99 6:38:05 PM Eastern Standard Time,
yellowrt@hotmail.com writes:

<< I had the same exact problem with my R/T. I took it to the dealer
and
 they didn't want to do to much but they decided to balance my tires and
 check the toe in. That didn't help. They didn't want to do to much
 because the vibration was past legal speed limits. So it took it upon
 myself, like about three others on the list and had the drive shaft
 balanced. It turned out that the dodge weights were undersized. Now
it
 is perfect, I had it up to 110 and I didn't have any problems.
 
 Chris Tesinsky
 '99 Solar Yellow R/T CC
>>

Is this vibration only on the club cabs? Mine is an RC and I have no
vibration.
Charles smith
1999 Dakota R/T
15.0@95 mph (g-tech)
Ican2u7176@aol.com (or) Dak99rt@aol.com
http://hometown.aol.com/ican2u7176/index.htm

______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:04 EDT