Just as a test, we took the IAT sensor on a 90% stock 5.2L and just hung it
out in the open air. Works great!! Try it next time you Dyno the engine
with the 52M (or any other TB).
- Bernd
At 02:43 PM 08/27/1999 +0000, you wrote:
> >
> > I did a HP check with JBA headers, JBA down tubes, K & N Gen II, ASP
> > crank-pulley,
> > Bullet 3" by 24" muffler and 3" piping cat back to the rear axle. The TB
> > is stock
> > HP 222.3. I lost HP with the RD 52mm TB. That dyno check had 209 HP. BTW
> > the 52 mm TB makes a excellent paper weight.
> >
> > --
> > Later
> >
> > Martin Tolentino
>
>
>To lean ? This condition was probably what Bruce and Frank were
>talking about in the Stage II TB project. Now I'm curious about
>a dyno with this TB and an IAT modification. Thanks Martin.
>
>GS -
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:04 EDT