>
> I did a HP check with JBA headers, JBA down tubes, K & N Gen II, ASP
> crank-pulley,
> Bullet 3" by 24" muffler and 3" piping cat back to the rear axle. The TB
> is stock
> HP 222.3. I lost HP with the RD 52mm TB. That dyno check had 209 HP. BTW
> the 52 mm TB makes a excellent paper weight.
>
> --
> Later
>
> Martin Tolentino
To lean ? This condition was probably what Bruce and Frank were
talking about in the Stage II TB project. Now I'm curious about
a dyno with this TB and an IAT modification. Thanks Martin.
GS -
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:04 EDT