The rocker you purchase will come with instructions on how to adjust them.
If not excellent instructions are available on the web. Cranecams.com or
Crower.com. In fact I will be glad to e-mail to you privately if you want. I
just did the rocker install 2 weeks ago.
----- Original Message -----
From: <Pukeloser@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, June 09, 2001 4:24 PM
Subject: DML: s-bolt & airbox + 1:6 rockers install ?'s
> Hey all,
>
> I'm back on the list after a long break (was going through withdrawls).
> Anyway I moved from CA back to OHIO which put alot of my perf work on
hold,
> but I'm back at it again.
> I have to install a modified manifold/TB/injectors (24#) and some alum
roller
> rockers (1:6 ratio).
> I was wondering if there is anything in depth about installing the rockers
> and how I adjust them once they're in.
> I also was wondering what y'all might recommend for an air cleaner to
replace
> the stock airbox? I was thinking about the K&N 14"x3" but would have liked
> something that draws cool air rather than the engine compartment air. I
also
> think I'll need an S-bolt for the airbox and wasn't sure what to ask for
when
> I order one so any help here would be appreciated too.
> I only live about 45 minutes from Summit Racing equip. so I'm hoping
they'll
> have some of the stuff I'll need.
> Thanks
>
> John S:
> '95 cc 318, 180 stat, MSD digi6+,MSD 8.5 wires, HP cap+rotor, MP PCM, DT
> headers, Gibson exhaust, no cat (3" from headers to tailpipe"), Transgo
shift
> kit, K&N filter, 1 quart oil filter (relocated), auburn LSD, superior
axles,
> 4.10 gears
> To do this month:
> ported TB, hughes engines intake manifold, 1:6 magnum roller rockers, MP
alum
> valve covers, Progear double roller timing chain
> To do this winter:
> project 408 stroker/ 9.25 rear end (and custom drive shaft so it doesn't
go
> flying away on me)
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:46 EDT