Bernd D. Ratsch wrote:
>
> Curious...does the engine sound "normal" when cranking? Take a plug out
> and crank the engine - see if any pressure comes out of it (compression).
>
> Since the distributor drive gear is run by the cam (and you said that you
> can't turn the distributor)...and the cam is turned via the timing
> chain...that leads to either a broken distributor drive gear shaft, broken
> distributor, broken camshaft, or a broken timing chain - that's why I asked
> if any pressure comes out of a cylinder.
It "sounds" normal, but I will check for compression when cranking when
I have some time on Saturday evening.
Your list coincides with my list of things to check on. Another thing,
I've been having problems with my motor chewing through distributor
rotors (like 6 mos or less,) and I've already developed a large amount
of side to side play in a dealer reman distributor after a little over a
year. Thinking that while I have the thing laid up, I should replace
the dist drive bushing?
>
> Just as a general rule (not to harp on anyone): Always find out the root
> cause of a code. Just because it's present...doesn't always mean that the
> sensor is at fault.
>
> - Bernd
Lesson learned, master Jedi... ;)
This archive was generated by hypermail 2b29 : Wed Jun 01 2005 - 05:44:45 EDT