In a message dated 99-03-25 22:48:43 EST, you write:
<< I've plumbed an adj. regulator into my '94 with a high volume pump and
return
line. Had it to the track last fall and ran the pressure through a range of
38 lbs to 52 lbs. My speed varied by about 1.3 mph through that range with
the highest speed coming consistently at 42lbs. or roughly stock pressure.
I've got a ported TB, headers, and MP controller. I am running at 4000+ ft.,
so maybe the thin air up here offsets the need for more pressure.
>>
How did you plumb this setup in? I would be very interested in doing hte same
to my truck.
Brad
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:13:21 EDT